How to Download & Flash Samsung Galaxy A50 (SM-A505F)

Firmware

Flash Tool

How to Flash Samsung Galaxy A50 (SM-A505F)

Make sure your device is atleast 30 percent charged to perform flashing.

• Switch off the mobile
• Press the Power + volume UP. Phone will enter in Recovery mode then select Reboot to Bootloader by pressing Power Key.
• Phone will turn into Download Mode.
• Now open the Odin flash tool and follow the steps as shown in the video
• Select Samsung SM-A505F
• Select the Odin tool and open it
• Select BL file
• Click AP or PDA then select AP File
• Click CP and select Modem File.
• Click CSC and select CSC File.
• After selection mobile will get detected automatically
• Now click start on system & installation is in process
• After installation mobile switch ON of its own.

Requirements to Flash.

• A windows PC or Laptop.
• Correct Firmware File.
• Usb Driver.
• Flash Tool.
• A detectable Usb data cable.
• A good battery backup (at least 50%).
• 
  

Problem will be Solved

1. Auto Restart On Off
2. Hanging While Device Running
3. Pin Lock
4. Pattern Lock
5. Face Look
6. Privacy Lock
7. Start Android Password
8. Auto Fastboot Mode
9. Auto Recovery Mode
10. Unfortunately Android Has Stopped Virus Problem
11. Storage Space Running Out
12. NV Error Fixed
13. Sp Tool Error S Not Enough Storage Space
14. White/Black LCD After Flash Other Firmware
15. Invalid IMEI Baseband Unknown And Dead After Flash
16. And More

Important Notes

* Download the correct firmware version for your Device.

* Backup all data Means, Create A Copy files of Contacts, Image, Video, Music and All Other Your Personal Document.

When the run flashing process the Flash tool of erases the data before start the flashing.

 How to use Odin:

1. Download Odin Tool.
2. Then extract the firmware files. 
3. Run Odin tool as Administrator on your PC.
4. Reboot your device into download mode, With Volume down+Home+Power Button.
5. Connect your device to PC via the USB port.
6. Click on the PA/PDA (Older versions of Odin have PDA instead of PA) button and select the firmware file tar.md5.
7. Wait for Samsung tool to analyze the file.
8. Click the Start button to start flashing the firmware using Odin.
9. Odin will show you the green-labeled message PASS! And your phone will automatically reboot and your flash is done.

**If you see any of our flash file are not working in your mobile phone, then please call us and tell us about your problem, we will try to solve your problem**