Official Flash Tool

 

How To Use and Download SP Flash Tool.

1. Download Sp Flash Tool and extract it first.
2. Download  Firmware you wish to flash and extract it.
3. Off your smart Phone.
4. Click "Flash_exe" to launch the Sp Flash Tool.
5. Click download tab and click the scatter loading button to load scatter file.
6. Scatter file is located in the firmware file.
7. Click on the "download icon" to launch the flashing process.
8. Then connect your smart device and click volume up or down button to ease the computer to recognize the smart device.
9. Wait for about 10 minutes, after a successful operation a message will be displayed along with a green circle.

How To Use and Download Samsung Odin Flash Tool.

1. Download Odin Tool.
2. Then extract the firmware files. 
3. Run Odin tool as Administrator on your PC.
4. Reboot your device into download mode, With Volume down+Home+Power Button.
5. Connect your device to PC via the USB port.
6. Click on the PA/PDA (Older versions of Odin have PDA instead of PA) button and select the firmware file tar.md5.
7. Wait for Samsung tool to analyze the file.
8. Click the Start button to start flashing the firmware using Odin.
9. Odin will show you the green-labeled message PASS! And your phone will automatically reboot and your flash is done.

How To Use and Download SPD upgrade Tool.

1. Download & Install SPD Upgrade Tool.
2. Download the latest version plus spreadtrum drivers for specific phone device.
3. Download Official Firmware. 
4. Extract the three files and run the spreadtrum upgrade tool.
5. Switch off your phone and connect your usb cable in your PC.
6. Load the PAC file.
7. Hold the device volume down or up button to accelerate connectivity.
8. click start downloading and connect your usb cord and flashing should begin.