How to Download flash file/firmware and flash Marlax Mx 100.

• File & Phone Information
• 
  

Brand & Model = MARLAX - MX100
Version 6.0 And 5.1
MTK USB Driver
Sp Flash Tool
7Zip
Size 519MB
MT6580

Upload by google drive

Requirements to Flash.

• A windows PC or Laptop.
• Correct Firmware File.
• Usb Driver.
• Flash Tool.
• A detectable Usb data cable.
• A good battery backup (at least 50%).
• 
  

How to flash your Marlax with Video 

 

Download_Flash_file

Download Official Firmware, Flash tool & Smart Phone Driver : Link Steps to Install Firmware.

1.Download Marlax MX100 Flash File firmware.v 2.Download SPFlash tool. 3.Extract the software to your PC 4.Look for flash too and launch it. 5.minimize SPFlash tool window. 6.Locate the downloaded Marlax MX100 flash file firmware. 7.Extract the file from rar format. 8.Open SPFlash tool. 9.Click on Scatter & Select extracted Marlax MX100 firmware folder. 10.Select the scatter file in the directory. 11.Wait for it to load the files. 12.Power OFF your Marlax MX100 phone. 13.Click on download. 14.Connect your Marlax MX100 phone while OFF to begin flashing. Flash done.

Problem will be Solved

1. Auto Restart On Off
2. Hanging While Device Running
3. Pin Lock
4. Pattern Lock
5. Face Look
6. Privacy Lock
7. Start Android Password
8. Auto Fastboot Mode
9. Auto Recovery Mode
10. Unfortunately Android Has Stopped Virus Problem
11. Storage Space Running Out
12. NV Error Fixed
13. Sp Tool Error S Not Enough Storage Space
14. White/Black LCD After Flash Other Firmware
15. Invalid IMEI Baseband Unknown And Dead After Flash
16. And More

Important Notes

* Download the correct firmware version for your Device.

* Backup all data Means, Create A Copy files of Contacts, Image, Video, Music and All Other Your Personal Document.

When the run flashing process the Flash tool of erases the data before start the flashing.

How To Flash Stock ROM Using Sp Flash Tool

1. Download Sp Flash Tool and extract it first.
2. Download  Firmware you wish to flash and extract it.
3. Off your smart Phone.
4. Click "Flash_exe" to launch the Sp Flash Tool.
5. Click download tab and click the scatter loading button to load scatter file.
6. Scatter file is located in the firmware file.
7. Click on the "download icon" to launch the flashing process.
8. Then connect your smart device and click volume up or down button to ease the computer to recognize the smart device.
9. Wait for about 10 minutes, after a successful operation a message will be displayed along with a green circle.